Dealing with a Sudden Water Heater Failure: Key Actions
Dealing with a Sudden Water Heater Failure: Key Actions
Blog Article
The publisher is making a number of great points related to How to Troubleshoot and Repair an Electric Water Heater in general in the content on the next paragraphs.
Many contemporary residences make use of an electric hot water heater for their furnace, as a result of its convenience and ease of use. However, just like any other electrical home appliances, issues may occur with its usage, unexpectedly. It can be really irritating to awaken to a chilly shower rather than a warm one or having your bath with water that isn't hot adequate or perhaps as well hot. Whatever the case may be, hot water heater problems can be rather stressful. Luckily, we have actually made a checklist of feasible options to your hot water heater concerns. There are a number of factors that might cause many of these troubles, it could be an issue with the power supply, the electric heating element, or the thermostat. Prior to doing anything, ensure you turn off the main power supply for safety. Whatever the problem is, getting it repaired should not position too much of a concern if you follow these actions:
Examine Your Power Supply:
As standard as this might seem, it is very necessary. Without adequate power, your hot water heater will certainly not operate. So the first thing to do when your water all of a sudden retires is to validate that it isn't a power trouble. Examine if the fuse is blown out or the breaker stumbled. If the circuit breaker is the concern, just turn it off and on once more. Replace any damaged or worn-out fuse. Test the device with power after these modifications to see if it's currently working.
Check the Burner in the Water Heater:
If it's not a power issue, after that attempt taking a look at your heating element if it is still working. Evaluate each of your burner to ensure the trouble isn't with any one of them. If any of them is defective, replace that component and then examine whether the warm water is back on.
Check Your Thermostat:
If your water heater still isn't working or the water appearing isn't warm enough, you might require to check the temperature level setups on your top thermostat. Ensure the breaker is turned off before doing anything. Open the accessibility panel as well as press the red switch for temperature level reset over the thermostat. This need to aid heat up the water. Turn the circuit breaker back on and also examine if the problem has actually been settled.
Call An Expert:
If after changing all faulty parts and also resetting your temperature level, the hot water heater still isn't working, you may require to contact an expert plumber for a professional viewpoint. The issue with your heating unit could be that the cold and hot faucets have actually been switched over or it might be undersized for the quantity of warm water required in your house. Whatever the situation might be, a specialist plumber would certainly aid solve the problem.
Conclusion
Hot water heater troubles are not constantly significant. Many of them are due to minor issues like a blown fuse or worn-out heating element. Changing the damaged components must suffice. Nevertheless, if you are still not able to fix the trouble, give a call to your closest plumber to come to get it repaired.
Common Reasons Why Your Hot Water Heater Isn’t Working
Water Gets Too Hot
Ouch! You wanted a hot shower, not boiling! If you have a newer model electric water heater, your water heater works with a thermostat (actually, two thermostats). If this thermostat has been jostled — or purposely reset — by someone in your home, the water flow will be much hotter than you expected.
FIX: Adjust the thermostat to a more moderate setting for producing hot water. Forty-nine degrees Celsius is recommended to prevent scalding.
Water Doesn’t Get Hot
This is the opposite of the previous problem, but it’s almost as bad. Your flow of hot water is merely lukewarm or even incoming cold water. Once again, an incorrect thermostat setting, or a faulty thermocouple in a gas water heater, could be to blame. Another explanation might be that there’s no power to the water heater (in the case of an electric heater) or the pilot light has gone out (if you have a gas unit).
FIX: Adjust your thermostat as necessary. If that doesn’t do the trick, check the power supply. Another possibility is the replacement of a damaged thermocouple in gas water heaters.
Leaking Water Heater
A leaking water heater (a sign may be low hot water pressure, or not enough hot water to shower) might be a reason to push the panic button… but first, take a few minutes to check where the leakage is coming from. Leaks near the top of the heater tend to indicate a problem with a valve, which won’t need a major repair. However, a leak from the water heater base is more serious.
FIX: You may need a qualified plumber to replace your drain valve or TPR (temperature pressure relief) valve. When your water heater is leaking from below, your plumber might be able to fix it if you call them soon enough. Otherwise, you will need to have a new water heater installed.
Noisy Water Heater
Sometimes your water heater might make some peculiar noises, loud enough to compete with your singing in the shower. Are these a cause for alarm? It depends on exactly what kind of sounds you are hearing. Sizzles and rumbles are both red flags, indicating a heavy sediment buildup in your hot water tank that might cause a breakdown in the near future. In addition, banging is a sign of a water hammer, which can lead to serious damage to your pipes.
FIX: To stop sizzling or rumbling, turn off the tank and have it flushed by a reliable plumbing company ASAP. Ask your plumber to install a water hammer arrestor to quiet down the banging and save the pipes.
Pilot Light Keeps Going Out
Many pilot lights go out once in a while, but when your water heater pilot light keeps going out continually, it’s a problem. And the chances are good that that problem stems from either a shortage of combustible air or a malfunctioning thermocouple.
FIX: Increase the air supply around your water heater by cleaning dust and lint off the appliance and clearing any clutter from the area around it. A bad thermocouple will require expert plumbing repair and is more than basic gas water heater troubleshooting.
Water Smells Bad
The water from your residential plumbing pipes should smell neutral. If it has a strong unpleasant odour, something’s wrong. To check whether your water heater is at fault, turn on a hot water faucet and let it run for a few minutes. And, yes, use your nose to determine exactly what you are smelling.
FIX: For a garlicky odour, relight the pilot light on your water tank. When you detect the scent of garbage, you’ll need a professional plumber to flush the hot water tank and possibly replace the anode rod. A strong smell of rotten eggs could signal a hazardous gas leak; turn off the gas supply if possible, get everyone out of your house, and make an emergency call to the gas company.
Water Looks Brown Or Rusted
The first thing to do is ask yourself, “Is the brown, rusty-looking water coming only from my hot water taps?” If the answer is yes, then most likely, either the anode rod or the water heater interior is starting to rust, especially if your hot water heater is nearing the end of its life expectancy. (A “no” answer means the issue does not originate from the hot water heater but rather from the water supply.)
FIX: Contact a plumber to inspect the water heater. If you catch the problem quickly enough, it might be fixable. Otherwise, you’ll need a water heater replacement. Consider installation of an efficient new tankless water heater.
https://www.huskyair.com/blog/hot-water-heater-isnt-working/
We hope you enjoyed our section on What Would Cause My Electric Water Heater to Stop Working?. Thanks a lot for taking a few minutes to read our blog. For those who liked our blog post if you please remember to pass it around. Thanks so much for taking the time to read it.
Secure, fast, dial! Report this page